BOD Incubator (Cooling)

Specification

1. Temperature range: 5.0°C to 60.0°C. Accuracy / Uniformity: ±0.5°C/±1°C
2. Temperature display: Digital LCD & Safety Controlller display LED 3½ digit
3. Control: Microprocessor based PID control. With Auto tune
4. Resolution: 0.1°C
5. Temperature sensor: PT 100
6. Heating: ‘U’ shaped Nichrome wire heater in SS sheathing
7. Cooling: CFC free Copeland make compressor utilizing R134A eco friendly refrigerant, with condenser,motor and relay.
8. Air circulation: Flange motor with impeller / blower
9. Construction: Double wall, with insulation, outer door key lockable, inner glass viewing door
10. Chamber illumination: Fluorescent light with door switch
11. Safety Instructions
    1. High temperature safety cut off
    2. Electrical overload cut off relay for compressor
    3. Time delay for compressor switch ON
    4. Electrical circuit breaker
12. Feet: Castor wheels with leveling screws
13. Trays: SS wire mesh heavy duty
14. Electrical: 230V / 15A / 50 Hz
15. Calibration certificate by ERTL – Mumbai with traceability to NPL – New Delhi

Dimentions

Inner Chamber Dimesion	External Dimension	Capacity	Wattage	Shelves
W x D x H cm	W x D x H cm	Liters		(SS)
35 x 35 x 35	55 x 60 x 85	72	1500	2
45 x 45 x 45	65 x 70 x 95	90	2000	2
45 x 45 x 60	70 x 70 x 105	120	2000	3
60 x 60 x 60	90 x 85 x 110	215	2500	3
60 x 60 x 90	90 x 85 x 135	320	3000	3
60 x 60 x 125	90 x 85 x 170	450	3500	4

Optional Extras / Accessories

1. PLC based system: PLC with HMI 3.7” touch screen grey monitor with 21 CFR part 11 features software
2. Magnetic door lock feature
3. GSM system: alarms sent to predefined mobile numbers
4. HMI : 5.7” touch screen grey in lieu of 3.7”
5. Digital PID controller with printer interface to connect EPSON Dot matrix line printer. Print interval programmable, can print date, time, temperature.
6. PC interface for above controller with software on CD & hardware or software with 21 CFR part 11 features
7. Imported RH sensor European make, Rotronic Switzerland for higher accuracy
8. Standby humidity system (except for 52 and 120 liters)
9. Standby refrigeration system (except for 52 and 120 liters)
10. Data logger: 4 point temperature data logger with sensors placed at specific points in chamber with printer interface and memory of 6000 readings per channel.
11. PC interface for above controller with software on CD & hardware

STD MODEL	GMP MODEL
1) Outer cabinet mild steel powder coated.	1) Inner chamber stainless steel 304 grade.
2) Inner chamber stainless steel SS 304 grade.	2) Inner chamber stainless steel mirror finish
We provide DQ, IQ, OQ, PQ documentation.

Pre Installation Mandatory Requirement :

(Guarantee void in case of non compliance)

1. Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However surrounding temperature should not exceed 30°C
2. Stabilized input voltage of 230V AC 20 Amps. Use of servo controlled stabilizer is recommended