|
Environmental Controlled Oven
- Temperature range: 10.0°C to 60.0°C. Accuracy / Uniformity: ±0.1 °C/± 1°C
- Humidity range: 25% to 98% RH. Accuracy/ Uniformity ±2%RH/±3%RH
- Temperature /Humidity display: Digital Big LCD Display and Digital LED Display forsafety controller.
- Control: Microprocessor based PID Auto tune control. With Digital safety controller
- Resolution: 0.1°C/1%RH
- Temperature sensor: Rutronic make (Imported).
- RH sensor: Rutronic make (Imported).
- Heating: 'U' shaped Nichrome wire heater in SS sheathing.
- Cooling: CFC free Copeland make compressor utilizing R 134 eco friendly refrigerant, with condenser, motor and relay.
- Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard.
- Air circulation: Flange motor with impeller / blower.
- Construction: Double wall, with puf insulation, outer door key lockable, inner glass viewing door.
- Chamber illumination: Fluorescent light with touch keys.
- Safety features
- High temperature safety cut off
- Low water level boiler cut off
- Electrical overload cut-off relay for compressor
- Time delay for compressor switch ON
- Electrical circuit breaker
- Feet: Castor wheels and levelling screws.
- Trays: SS wire mesh heavy duty
- Electrical: 230V/ 15A/50 Hz
| Cu.ft |
Liters |
W x D x H cm |
W x D x H cm |
(SS) |
| 3 |
90 |
43 x 43 x 50 |
65 x 114 x 130 |
2 |
| 6 |
180 |
51 x 51 x 70 |
79 x 121 x 130 |
2 |
| 10 |
300 |
55 x 55 x 100 |
79 x 121 x 165 |
3 |
| 12 |
360 |
60 x 60 x 100 |
79 x 121 x 199 |
4 |
| 16 |
480 |
65 x 65 x 114 |
79 x 121 x 247 |
5 |
| 30 |
800 |
80 x 80 x 125 |
99 x 141 x 199 |
5 |
| 38 |
1000 |
80 x 80 x 155 |
99 x 141 x 247 |
5 |
- LC based system: PLC with HMI 3.7" touch screen grey monitor with 21 CFR Part 11 features software.
- Magnetic door lock feature
- GSM system: alarms sent to predefined mobile numbers
- HMI: 5.7" touch screen grey in lieu of 3.7"
- Digital PID controller with printer interface to connect EPSON Dot matrix line printer. Print interval programmable, can print date, time, temperature.
- PC interface for above controller with software on CD & hardware or software with 21 CFR part 11 features
- Imported RH sensor European make, Rotronic Switzerland for higher accuracy
- Standby humidity system (except for 52 and 120 liters)
- Standby refrigeration system (except for 52 and 120 liters)
- Data logger: 4 point temp. + 4 point humidity data logger with sensors placed at specific points in chamber with printer interface and memory of 5000 readings per channel
- PC interface for above controller with software on CD & hardware
| STD MODEL |
GMP MODEL |
| 1. Outer cabinet mild steel powder coated. |
1. Inner chamber stainless steel 304 grade. |
| 2. Inner chamber stainless steel SS 304 grade. |
2. Inner chamber stainless steel mirror finish |
| We provide DQ, IQ, OQ, PQ documentation. |
- Distilled water OR DM water continuous supply with tap for boiler input of ½” BSP at 3 feet height
- Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan However surrounding temperature should not exceed 30°C
- Stabilized input voltage of 230V AC 20 Amps. Use of servo controlled stabilizer is recommended
- Water drain line with ½” nozzle to be provided at floor level
|
|
